Windows 10 Restarting Screen Stuck? Get It Moving Again.

Is your Windows 10 computer stuck on the restarting screen? Don’t worry, we’ve got you covered with effective troubleshooting methods. Dealing with a computer that won’t restart can be frustrating, but there are steps you can take to get it moving again without losing any data.

Key Takeaways:

• If your Windows 10 computer is stuck on the restarting screen, try waiting for some time to see if it completes the restart process.
• Unplug any external devices and peripherals, then attempt to restart your computer.
• If that doesn’t work, perform a hard reset by holding down the power button and then turning your computer back on.
• Other troubleshooting methods include performing a startup repair, running the System File Checker and Check Disk Utility, uninstalling recent updates, or performing a system restore.
• You can also try advanced fixes like resetting Windows Update, running the System Maintenance Troubleshooter, disabling fast startup, rolling back device drivers, checking for malware, or performing a clean boot of Windows.

Why is Windows 10 Stuck on the Restarting Screen?

There can be several reasons why your Windows 10 computer gets stuck on the restarting screen, ranging from software conflicts to hardware issues. It can be a frustrating experience, but don’t worry, there are steps you can take to identify and resolve the problem.

One common cause of this issue is a software or driver conflict. Sometimes, certain programs or drivers can interfere with the restart process, causing your computer to get stuck. Additionally, faulty updates can also trigger the restarting screen problem. If a recent update is causing conflicts, your computer might enter an endless restart loop or refuse to restart at all.

Another possibility is a hardware problem. Issues with components like the motherboard, hard drive, or power supply can prevent your computer from restarting correctly. In such cases, it’s important to diagnose and address any hardware-related issues to resolve the restarting screen problem.

Causes of Windows 10 Stuck on the Restarting Screen:

Basic Troubleshooting Steps

Before diving into more advanced solutions, let’s start with some basic troubleshooting steps to see if we can fix the Windows 10 restarting screen issue.

1. Wait for the restart process to complete: Sometimes, Windows may take longer than expected to restart. Give it some time and see if it progresses. If not, move on to the next step.

2. Unplug external devices and peripherals: Disconnect any external devices or peripherals, such as USB drives, printers, or scanners, and then restart your computer. Sometimes, conflicts between these devices and Windows can cause the restarting screen issue.

3. Perform a hard reset: If your computer is still stuck on the restarting screen, you can try performing a hard reset. To do this, press and hold down the power button for about 10 seconds until your computer turns off. Then, press the power button again to turn it back on. This can help reset any system glitches that may be causing the issue.

4. Try safe mode: If the above steps don’t resolve the problem, you can try starting your computer in safe mode. Safe mode loads only essential drivers and services, eliminating potential conflicts that could be causing the restarting screen issue. To enter safe mode, restart your computer and continuously press the F8 key until the Advanced Boot Options menu appears. From there, select the “Safe Mode” option.

If you’ve followed these steps and your computer is still stuck on the restarting screen, don’t worry. There are more advanced solutions available that can help resolve the issue. In the next sections, we will delve deeper into troubleshooting methods such as performing a startup repair, running the System File Checker and Check Disk Utility, uninstalling recent updates, and performing a system restore. We’ll also explore additional advanced fixes and introduce PassFab Computer Management, a powerful tool that can help you fix various system issues.

Performing Startup Repair

If the previous steps didn’t resolve the issue, performing a startup repair can often help fix the Windows 10 restarting screen problem. Startup repair is a built-in troubleshooting tool that can automatically fix certain issues preventing your computer from starting up properly.

To perform a startup repair, you can follow these steps:

1. Start by accessing the Advanced Startup options. You can do this by restarting your computer and continuously pressing the F8 key until the Advanced Startup menu appears.
2. From the Advanced Startup options, select “Troubleshoot” and then choose “Advanced options”.
3. In the Advanced options menu, click on “Startup Repair” and wait for the tool to diagnose and fix any issues with your computer’s startup process.
4. Follow the on-screen instructions to complete the repair process. Once done, restart your computer and check if the Windows 10 restarting screen problem has been resolved.

In many cases, a startup repair can resolve the issue and get your computer up and running again without being stuck on the restarting screen. However, if this method doesn’t work, don’t worry! There are still other troubleshooting steps you can try to fix the issue.

Running System File Checker and Check Disk Utility

Sometimes, corrupt system files or disk errors can lead to a Windows 10 computer getting stuck on the restarting screen. Running the System File Checker and Check Disk Utility can help resolve these issues.

The System File Checker (SFC) is a built-in Windows tool that scans for and repairs corrupt system files. To run the SFC, follow these steps:

1. Open the Start menu and type “Command Prompt” in the search bar.
2. Right-click on Command Prompt and select “Run as administrator”.
3. In the Command Prompt window, type “sfc /scannow” and press Enter.
4. The SFC will now scan your system files and automatically repair any issues it finds.

The Check Disk Utility (CHKDSK) is another useful tool that checks for and fixes disk errors. Here’s how to run the CHKDSK:

1. Open the Start menu and type “Command Prompt” in the search bar.
2. Right-click on Command Prompt and select “Run as administrator”.
3. In the Command Prompt window, type “chkdsk /f /r” and press Enter.
4. You will be prompted to schedule a disk check on the next restart. Type Y and press Enter.
5. Restart your computer, and the CHKDSK will run automatically before Windows starts.

Running the System File Checker and Check Disk Utility should help identify and fix any underlying system or disk errors that may be causing your Windows 10 computer to get stuck on the restarting screen.

Uninstalling Recent Updates

If you noticed that the Windows 10 restarting screen problem started after installing updates, uninstalling those updates may solve the issue. Sometimes, a recent update can cause conflicts or compatibility issues, resulting in the system getting stuck on the restarting screen. Here’s how you can uninstall updates:

1. Press the Windows key + I to open the Settings app.
2. Click on “Update & Security”.
3. In the left sidebar, select “Windows Update”.
4. Click on “View update history”.
5. Click on “Uninstall updates” at the top of the page.
6. A list of installed updates will appear. Select the updates that were installed recently and caused the restarting screen issue.
7. Right-click on the selected updates and choose “Uninstall”.
8. Follow the on-screen instructions to complete the uninstallation process.

After uninstalling the updates, restart your computer and check if the Windows 10 restarting screen problem has been resolved. If the issue persists, you can try other troubleshooting methods mentioned earlier in this article.

Performing a System Restore

A system restore can undo recent changes and potentially fix the Windows 10 restarting screen issue. Here’s how you can perform a system restore on your computer:

1. Press the Windows key + R to open the Run dialog box.
2. Type “rstrui” and press Enter to open the System Restore window.
3. In the System Restore window, click on “Next” to proceed.
4. Choose a restore point that was created before you started experiencing the restarting screen problem.
5. Click on “Next” and then “Finish” to start the system restore process.
6. Wait for the process to complete, and then your computer will restart.

Note: Performing a system restore will remove any programs or drivers that were installed after the selected restore point. Make sure to back up any important files and data before proceeding.

If the Windows 10 restarting screen issue was caused by a recent software or driver installation, a system restore can help revert your computer back to a stable state. However, if the problem persists even after performing a system restore, you may need to consider other troubleshooting methods mentioned earlier or seek professional support.

System Restore Table

Additional Advanced Fixes

If the previous methods didn’t resolve the Windows 10 restarting screen issue, don’t worry. We have some additional advanced fixes that might do the trick. One option you can try is resetting Windows Update. Sometimes, a corrupt or incomplete update can cause your computer to get stuck on the restarting screen. To reset Windows Update, follow these steps:

1. Press the Windows key and type “Command Prompt,” then right-click on the Command Prompt app and select “Run as administrator.”
2. In the Command Prompt window, type the following command and press Enter: net stop wuauserv
3. Next, type these commands one by one and press Enter after each command: net stop cryptSvc, net stop bits, and net stop msiserver
4. Once the services are stopped, you need to rename the SoftwareDistribution and Catroot2 folders. To do this, type the following commands one by one and press Enter after each command: ren C:\Windows\SoftwareDistribution SoftwareDistribution.old and ren C:\Windows\System32\catroot2 Catroot2.old
5. Finally, restart the Windows Update services by typing these commands in the Command Prompt window and pressing Enter after each command: net start wuauserv, net start cryptSvc, net start bits, and net start msiserver

Another option is to use the System Maintenance Troubleshooter. This built-in tool can help identify and fix issues that may be causing your computer to get stuck on the restarting screen. To run the System Maintenance Troubleshooter, follow these steps:

1. Press the Windows key and type “Control Panel,” then click on the Control Panel app to open it.
2. In the Control Panel, select “System and Security,” then click on “Security and Maintenance.”
3. Under the “Maintenance” section, click on “Troubleshooting.”
4. In the Troubleshooting window, select “View all” on the left-hand side.
5. Scroll down and click on “System Maintenance.”
6. Follow the on-screen instructions to let the troubleshooter scan for and fix any issues.

Disabling fast startup can also help resolve the Windows 10 restarting screen problem. Fast startup is a feature that can cause conflicts with certain hardware and drivers, resulting in issues like the restarting screen problem. To disable fast startup, follow these steps:

1. Press the Windows key and type “Control Panel,” then open the Control Panel app.
2. In the Control Panel, select “System and Security,” then click on “Power Options.”
3. Click on “Choose what the power button does” on the left-hand side.
4. Click on “Change settings that are currently unavailable.”
5. Scroll down to the “Shutdown settings” section and uncheck the box next to “Turn on fast startup.”
6. Click “Save changes” to apply the settings.

If you’re still experiencing the Windows 10 restarting screen issue, you can try rolling back device drivers. Sometimes, a faulty or incompatible driver can cause your computer to get stuck on the restarting screen. Here’s how to roll back device drivers:

1. Press the Windows key and type “Device Manager,” then click on the Device Manager app to open it.
2. In the Device Manager window, expand the category of the device driver you want to roll back.
3. Right-click on the device driver and select “Properties.”
4. In the Properties window, click on the “Driver” tab.
5. Click on “Roll Back Driver” and follow the on-screen instructions to complete the process.

Using PassFab Computer Management

PassFab Computer Management is a powerful tool that can help you fix various system issues, including the Windows 10 restarting screen problem. Let’s explore how it works.

With PassFab Computer Management, you can easily diagnose and repair common Windows 10 restart issues. The software provides an intuitive interface that allows you to scan your computer for any underlying problems that may be causing the restarting screen problem.

PassFab Computer Management offers a range of advanced features to resolve system issues. It can help you identify and fix software conflicts, repair corrupted system files, and optimize your computer’s performance. The tool also provides solutions for hardware-related problems that may be causing the restarting screen issue.

By utilizing PassFab Computer Management, you can eliminate the frustration of dealing with a Windows 10 computer stuck on the restarting screen. The software’s comprehensive capabilities ensure that your system is running smoothly without any restart issues.

Contacting Professional Support

If you’ve tried all the troubleshooting methods we’ve discussed and your Windows 10 computer is still stuck on the restarting screen, it may be time to seek professional support. Sometimes, the issue may be more complex and require the expertise of a technician or Microsoft support.

By reaching out to professional support, you can receive personalized assistance tailored to your specific situation. They can provide guidance on advanced troubleshooting techniques, identify any underlying hardware or software issues, and help you find a solution to get your computer back up and running.

When contacting professional support, be prepared with relevant information about your computer, such as its model, operating system version, and any error messages you have encountered. This will help the support team diagnose the problem more efficiently.

Remember, seeking professional support does not mean you have exhausted all options or are incapable of resolving the issue on your own. It is simply a proactive step to ensure your computer gets the necessary attention and expertise it needs to overcome the restarting screen problem.

Preventing Future Restarting Screen Issues

To avoid encountering the Windows 10 restarting screen problem in the future, it’s important to follow some preventive measures. Here’s what you can do to keep your system running smoothly:

1. Regularly update drivers and software: Outdated drivers or software can cause compatibility issues and lead to system crashes. Make sure to regularly check for updates and install them to ensure optimal performance.
2. Perform regular system maintenance: Regularly clean up temporary files, defragment your hard drive, and run disk cleanup utilities to keep your system clean and efficient.
3. Be cautious with system updates: While it’s important to keep your system up to date, it’s also essential to be cautious with updates. Before installing updates, check for any known issues or conflicts that may arise.
4. Stay vigilant against malware: Malware can cause various system issues, including the Windows 10 restarting screen problem. Install a reliable antivirus software and regularly scan your system for malware.

By following these preventive measures, you can minimize the chances of encountering the Windows 10 restarting screen problem and ensure a smooth and uninterrupted computing experience.

Conclusion

Dealing with a Windows 10 computer stuck on the restarting screen can be frustrating, but with the troubleshooting methods we’ve covered, you should be able to get your system back on track. Stay patient and persistent, and you’ll soon resolve the issue.

If your Windows computer is stuck on the restarting screen, there are several troubleshooting steps you can try. First, wait for some time to see if Windows completes the restart process. If it doesn’t, unplug any external devices and peripherals and try restarting again. If that doesn’t work, perform a hard reset by holding down the power button and then turning your computer back on.

If your computer is still stuck on the restarting screen, you can try performing a startup repair, running the System File Checker and Check Disk Utility, uninstalling new updates, or performing a system restore. Other options include resetting Windows Update, running the System Maintenance Troubleshooter, disabling fast startup, rolling back device drivers, checking for malware, or performing a clean boot of Windows. If none of these fixes work, you can also use PassFab Computer Management, a comprehensive computer repair tool that can fix various system issues.

By following these troubleshooting methods, you’ll be able to effectively troubleshoot and fix the Windows 10 restarting screen problem. Remember to regularly update drivers and software, perform system maintenance, and be cautious with system updates to prevent future instances of this issue from occurring.